Clik here to view.
CNC Knife
Description: The CNC Knife is a plotter with a multi-functional tool head that moves along the X and Y planes for mechanized knife cutting, creasing, and perforation operations. CAD programs control...
View ArticleClik here to view.
2D Drawing of Metal Armature
I drew a dimensioned drawing of a brass armature I’m using for another project. Till now I was using a (poorly) hand draw sketch, this will come in very handy. PDF Punch Pattern PDF Original armature...
View ArticleClik here to view.
Laser Cut Turning Project – Step 1: The Cutting
I made two sets of cuts for the laser cut turning project, one from AMS and one I did in the shop. The one from AMS was cut from one sheet of 1/4″ luan plywood I bought at Home Depot, not a great...
View ArticleClik here to view.
Laser Cut Turning Project – Step 2: The Glue Up
Glued up two sets of laser cut combs. One was cut by AMS and one by me on the floor. I used a bunch of rubber bands to hold it all together. I trimmed it a bit on the band saw before I turn it on the...
View ArticleClik here to view.
Laser Cut Turning Project – Step 3: The Turning and Finishing
Plans for a lamp were a little ambitious. I completely miscalculated how much material I would need, so the form changed to a bud vase. I turned two, the first one (pictured above) went pretty well....
View Article
